DIY EZ Cloner for Under 50 bucks

OK...so I realized that raising tomato plants from seed at this point is going to be challenging and I dont really have a resource in the winter for tomato plants, so whats an Aquaponics Gardener to do...Why, build my own DIY EZ Cloner and all for under $50..I say around $40 in the video, but I didnt figure in the cost of the pipe, fittings and the three additional Net Pots w/Neoprene inserts Im going to need, so the total comes in at a little under $50..still not bad considering the price of a commercial unit. Here a few pics of the unit and a video overview of the cloner...I think it is going to work out just fine.

 The Finish Product

 A Blue 20 Gallon Tote from my local Family Dollar for $10

 Fairly deep compared to an 18 Gallon Tote

 Layout for 2" holes to accommodate Net Pots

 Starting the holes

Standard 2" Net Pots with Neoprene inserts.

 Finished the holes for now, still have to purchase 3 more 2" Net Pots w/Inserts

 1/2" PVC pipe spray bar before being drilled for spray heads

 Spray bar with 360 Degree spray heads installed.

 Close up of 360 mist head  11/64 drill bit used for installation

 Close up of 360 degree downspray streaming head 11/64 drill bit used for installation

 600 GPH pump to be changed out for a 300+ GPH later on.

Assembly installed in Tote

Here is a short video overview of the EZ Cloner in action.

Enjoy!!!